PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : mal sehen



DimpleX
05.03.2007, 23:12
You are a network technician at MC-Bar.de.
You are currently troubleshooting a Cisco router.
You issue the show ip route command.
The output from the command is displayed in the following exhibit:
MC-Bar.de 1#show ip route Codes:
C - connected, S - static, I - IGRP, R- RIP, M - mobile,
B - BGP D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inner
area E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, * - Candidate default U – per-user static route
Gateway of last resort is not set
R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
C 192.168.9.0/24 is directly connected, Serial1
R 192.168.10.0/24 [120/7] via 192.168.9.1, 00:00:02, Serial1
R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C 192.168.1.0/24 is directly connected, Ethernet0
C 192.168.2.0/24 is directly connected, Serial0
R 192.168.3.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
R 192.168.4.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
R 192.168.6.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
R 192.168.7.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
----------------------------------------------------------------------------------
Which route will not be entered into the routing table of a neighboring router?
A. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
B. C 192.168.1.0/24 is directly connected, Ethernet0
C. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0




weiss einer ne lösung?


DimpleX